Basics For Motion Control; Customizing The Super Knob Settings - Yamaha MONTAGE M6 Operation Manual

Basics for Motion Control

Motion Control can be set by setting the Source for the Controller as well as the control target
(Destination and Parameter) from the Control Assign screen.
For Super Knob, set the Display Filter to SuperKnob and then set the Source (AsgnKnob 1–8)
and Destination.
For Motion Sequence, set the Source to a Motion Sequence Lane from 1 to 4.
For Envelope Follower, set the Source to EnvFollow.
[PERFORMANCE] → Common selection → [EDIT/
[PERFORMANCE] → Part selection → [EDIT/

Customizing the Super Knob settings

By using the Super Knob, you can simultaneously control the Assign 1 to 8 values that are
assigned to Knobs 1 to 8 that are common to all Parts.
Moving the Super Knob while playing the keyboard lets you modify sounds, and you can see
the parameter values on the Sub display.
If the [ASSIGN] button is turned on (and the button is lit), you will see the changes to the Knobs
1 to 8 on the indicator and the Sub display.
By combining the Super Knob and the Motion Sequencer, you can achieve more complex
sound changes.
] → Control → Control Assign
] → Mod/Control → Control Assign
38