Yamaha MONTAGE M6 Operation Manual page 376

Tempo Sync (LFO Tempo Sync)
Sets the speed of the LFO Wave changes to synchronize to Arpeggio or Song playback.
Settings: Off (not synchronized), On (synchronized)
When Tempo Sync is set to Off
Speed (LFO Speed)
Sets the speed of LFO Wave changes.
This parameter is not available when Tempo Sync is set to On.
Settings: 0–63
Random Speed (Part LFO Random Speed Depth)
Changes the LFO Speed randomly.
This parameter is not available when Tempo Sync is set to On.
Settings: 0–127
When Tempo Sync is set to On
Tempo Speed (LFO Tempo Speed)
This parameter is available when Tempo Sync is set to On. You can set the speed of changes
in LFO Wave by using musical note values.
Settings: 1/16 (sixteenth notes), 1/8 Tri. (eighth-note triplets), 1/16 Dot. (dotted sixteenth
notes), 1/8 (eighth notes), 1/4 Tri. (quarter-note triplets), 1/8 Dot. (dotted eighth
notes), 1/4 (quarter notes), 1/2 Tri. (half-note triplets), 1/4 Dot. (dotted quarter
notes), 1/2 (half notes), Whole Tri. (whole-note triplets), 1/2 Dot. (dotted half notes),
1/4 × 4 (quarter-note quadruplets; four quarter notes to the beat), 1/4 × 5 quarter-
note quintuplets; five quarter notes to the beat), 1/4 × 6 (quarter-note sextuplets;
six quarter notes to the beat), 1/4 × 7 (quarter-note septuplets; seven quarter notes
to the beat), 1/4 × 8 (quarter-note octuplets; eight quarter notes to the beat), 1/4 ×
16 (sixteen quarter-notes to the beat), 1/4 × 32 (thirty-two quarter-notes to the
beat), 1/4 × 64 (sixty-four quarter-notes to the beat)
Delay (LFO Delay Time)
Sets the delay time between the moment you press a key on the keyboard and the moment the
LFO comes into effect.
The larger the value, the longer the delay time before the LFO comes into effect.
Settings: 0–127
Fade In (LFO Fade In Time)
Sets the amount of time for the LFO effect to fade in after the delay time set in Delay (LFO
Delay Time) has elapsed.
376