Using The Expanded Softsynth Plugin For Montage M; Using The Daw Remote Function - Yamaha MONTAGE M6 Operation Manual

1
With the tracks you wish to use for playing the tone generator block, set
the MIDI output to Port 1 on the MONTAGE M.
2
Enter the MIDI data for each track.
The sound engine that corresponds to each track on the MIDI channel should be
controlled on the Mixing screen on the MONTAGE M.

Using the Expanded Softsynth Plugin for MONTAGE M

The Expanded Softsynth Plugin (ESP) for MONTAGE M features the same sound engine as the
hardware MONTAGE M.
Since this software plugin works in sync with the hardware MONTAGE M, the same MONTAGE
M sounds can be integrated seamlessly into your music production (where software is most
convenient for a DAW), and into your live performance (where the actual instrument is used
onstage). This lets you use either version of the MONTAGE M, depending on your personal
preferences and specific application.
For more information on the installation and activation of the ESP, access the MONTAGE M
Welcome page from the Expanded Softsynth Plugin for MONTAGE M Download Information
leaflet included with the hardware MONTAGE M.
ESP Manual can be downloaded from the website below.
https://download.yamaha.com/

Using the DAW Remote function

The DAW Remote function allows you to control the DAW software from the controllers on the
top panel of the MONTAGE M.
This function is available only when the instrument is connected to the computer with a USB
cable. It cannot be used when connected with a MIDI cable.
Settings on the MONTAGE M
1
Use an AB-type USB cable to connect a computer to the [USB TO HOST]
terminal of the instrument.
2
Select the DAW software from: [DAW REMOTE] → Settings → DAW.
Settings on the DAW software
99