Yamaha MONTAGE M6 Operation Manual page 43

5-3. Tap each of the Destination 6 to 8 tabs to check that the Source is set to
AsgnKnob 6 to 8 respectively, and the Destination Parameter is set to Part 1
to 3 Volume.
6
Set the LEFT position on the Super Knob.
This makes the settings for the Super Knob when turned all the way to the left.
6-1. Press the KNOB POSITION [LEFT] button.
6-2. Make sure that the COMMON is selected for Part select and then press the
[ASSIGN] button.
6-3. To set only the CFX PopStudioGrand on Part 1 to sound, turn Knob 6
(Assign6) all the way to the right (to the maximum value) and Knob 7
(Assign7) and Knob 8 (Assign8) all the way to the left (to the minimum
value).
6-4. Save the settings by simultaneously holding down the [SHIFT] button and
pressing the KNOB POSITION [LEFT] button.
7
Set the RIGHT position on the Super Knob.
This makes the settings for the Super Knob when turned all the way to the right.
7-1. Press the KNOB POSITION [RIGHT] button.
7-2. To set only the TV Show FM EP on Part 3 to sound, turn Knob 8 (Assign8) all
the way to the right (to the maximum value) and Knob 6 (Assign6) and Knob
7 (Assign7) all the way to the left (to the minimum value).
7-3. Save the settings by simultaneously holding down the [SHIFT] button and
pressing the KNOB POSITION [RIGHT] button.
43