Yamaha MONTAGE M6 Operation Manual page 333

Settings: −64–+0–+63
Positive values: The lower the key played, the softer the volume becomes; the
higher the played, the louder the volume becomes.
Negative values: The lower the key played, the louder the volume becomes; the
higher the key played, the softer the volume becomes.
Level (Element Level)
Sets the output level (volume) for each Element.
Settings: 0–127
Level/Vel (Level Velocity Sensitivity)
Offset (Level Velocity Offset)
Curve (Level Sensitivity Key Curve)
Sets how the Level (Volume) responds to Velocity or the strength of the keystroke. Offset
adjusts all settings specified in Level/Vel. When the value exceeds 127, the velocity is set to
127. Also, with the Curve setting, you can set how the volume responds to the velocity. The
vertical axis represents the velocity while the horizontal axis represents the range for the
volume changes.
Settings: Level/Vel: −64–+63
Positive value: The faster the Velocity, the louder the volume becomes.
Negative value: The slower the Velocity, the louder the volume becomes.
0: No changes regardless of the Velocity setting.
Settings: Offset: 0–127
Offset (Level Velocity Offset)
= 0
A: Level/Vel (Level Velocity Sensitivity) = 0
B: Level/Vel (Level Velocity Sensitivity) = 32
C: Level/Vel (Level Velocity Sensitivity) = 64
X: Velocity of the moment the key is pressed
Y: Velocity value sent to the internal tone generator
Offset (Level Velocity Offset)
= 64
333
Offset (Level Velocity Offset)
= 96