Yamaha MONTAGE M6 Operation Manual page 90

Connecting external MIDI instruments
The USB and MIDI terminals on the rear panel are used for connecting to a computer and
external MIDI devices. You can use these terminals to send Program Change messages to
external MIDI devices when you change the Performance.
The Zone function is useful for setting up external MIDI devices.
Contents
Setting up the Zone function
Connecting and setting up a computer
Connecting a computer and setting up
Installing the Yamaha Steinberg USB driver
Setting up for sending and receiving audio and MIDI
About audio channels
MIDI channels and MIDI ports
About music production using the computer
MIDI recording of your keyboard performance on the DAW
Using the tone generator block to play back Songs on the DAW
Using the Expanded Softsynth Plugin for MONTAGE M
Using the DAW Remote function
Connecting a smart device
Connecting External MIDI Instruments
Connecting a USB MIDI keyboard to the [USB TO DEVICE] terminal
Compatible MIDI devices
Special notes concerning MIDI communication
Connecting an external MIDI device to MIDI terminals
90
om01basicoperation0290