Yamaha MONTAGE M6 Operation Manual page 534

Display name
Low Gain R
Low Level
Low Mute
Low Ratio
Low Threshold
Lower Range
LPF Cutoff
Parameter name
Low Subband Gain
Rch
Low Level
Low Mute
Low Ratio
Low Threshold
Lower Range
LPF Cutoff
Frequency
Effect types using the parameter
Stereophonic Optimizer
Isolator
Isolator
REV-X Hall, REV-X Room
Multi Band Comp
Multi Band Comp
VCM Auto Wah, VCM Touch Wah, VCM
Pedal Wah
Control Flanger
Control Phaser
REV-X Hall, REV-X Room, R3 Hall, R3
Room, R3 Plate, SPX Hall, SPX Room,
SPX Stage, Space Simulator, Amp
Simulator 2, Comp Distortion, Noisy, Ring
Modulator, Dynamic Ring Modulator, Auto
Synth, Early Reflection, Gated Reverb,
Reverse Reverb, Auto Synth, Noisy
534
Description
Sets the resultant
gain of the Low
band after the
adjustment of the
stereo sound (R
channel).
Sets the level for
the low band.
Switches the mute
for the low band.
Sets the adjustment
of the low
frequencies.
Sets the
compression ratio
for the low
frequencies.
Sets the minimum
input level for the
effect to be applied
to the low band.
Sets the maximum
value for the
variable range of
the Wah filter.
Sets the maximum
value for the
variable range of
the Flanger Control.
Sets the maximum
value for the
variable range of
the Phase Control.
Sets the high
frequency range cut
by the Low-Pass
Filter.