Advertisement
5/28/22, 10:13 AM
Description is for left component only. Procedure on the right side is identical.
Additional Information
Overview of Tightening Torques
End fitting to seat mechanism
Flat-head
screwM10
A-pillar trim panel to body
Sheet metal screw
4,8x38
Roof function centre
https://www.newtis.info/tisv2/a/en/g20-m340i-xdrive-lim/repair-manuals/51-body-equipment/51-44-headlining/1VncysQyIM
Removing and installing/replacing the headlining (equipment specification without slide/tilt sunroof)
Renew screw.
Check the clips (1) and guides (2) on the trim panel for
the water channel (3) for damage.
Clip in the trim panel for the water channel (1).
Tightening torque
Tightening torque
Tightening torque
Used in step
24
42 Nm
Used in step
27
2,6 Nm
Used in step
29
1,2 Nm
33/38
Advertisement
