Advertisement
5/28/22, 10:13 AM
12 – Remove both C-pillar trim panels
Description is for left component only. Procedure on the right side is identical.
https://www.newtis.info/tisv2/a/en/g20-m340i-xdrive-lim/repair-manuals/51-body-equipment/51-44-headlining/1VncysQyIM
Removing and installing/replacing the headlining (equipment specification without slide/tilt sunroof)
▶ Remove the B-pillar trim panel
Fully position the front seat to the front and top.
Loosen screw (1).
Remove end fitting (2).
Unclip clips (3).
Feed B-pillar trim panel (1) out of the front and rear lip
of edge protections and the guides (2).
Feed upper seat belt (2) out of B-pillar trim panel (1).
10/38
Advertisement
