Advertisement
5/28/22, 10:13 AM
24 – Installing both B-pillar trim panels
Description is for left component only. Procedure on the right side is identical.
https://www.newtis.info/tisv2/a/en/g20-m340i-xdrive-lim/repair-manuals/51-body-equipment/51-44-headlining/1VncysQyIM
Removing and installing/replacing the headlining (equipment specification without slide/tilt sunroof)
Result
»
Guide is damaged.
Measure
▶ Install the B-pillar trim panel
Check clips (1) and clamp (4) for damage, renew if
necessary.
Check the guides (3) for damage.
Renew the C-pillar trim panel .
Schematic diagram is for example purposes.
Some parts may differ in certain details.
Feed C-pillar trim panel (2) into guides towards the
rear.
Clip in clips (3).
Clip in clamp (4).
Guide in C-pillar trim panel (2) under the lip of edge
protection (1).
21/38
Advertisement
