Advertisement
5/28/22, 10:13 AM
Pyrotechnic components.
Danger! Life-threatening injuries!
All work on pyrotechnic parts may be carried out by technically experienced and appropriately
trained personnel only.
Replace any damaged part or ones that have been dropped.
For additional information see: 72 00 Safety regulations on handling components with gas
generators.
4 – Remove both sun visors
Description is for left component only. Procedure on the right side is identical.
https://www.newtis.info/tisv2/a/en/g20-m340i-xdrive-lim/repair-manuals/51-body-equipment/51-44-headlining/1VncysQyIM
Removing and installing/replacing the headlining (equipment specification without slide/tilt sunroof)
▶ Remove sun visor
Have the set of special tools 0 493 752 (00 9 329)
ready.
Unclip the cover (1) with suitable tools.
Loosen screw (2).
Unclip A-pillar trim panel (3) with clips (4) and guide it
out upwards.
4/38
Advertisement
