Advertisement
5/28/22, 10:13 AM
https://www.newtis.info/tisv2/a/en/g20-m340i-xdrive-lim/repair-manuals/51-body-equipment/51-44-headlining/1VncysQyIM
Removing and installing/replacing the headlining (equipment specification without slide/tilt sunroof)
End fitting to seat mechanism
Flat-head
screwM10
Check the clips (1) for damage and renew if
necessary.
Guide upper seat belt (2) in B-pillar trim panel (1).
Insert B-pillar trim panel (1) into guides (2) and under
the front and rear lips of edge protection.
Clip in the B-pillar trim panel (1) with the clips (3).
Fully position the front seat to the front and top.
Insert the end fitting (2).
Renew the screw (1).
Parts: Screw
Tighten down screw (1).
Renew screw.
Tightening
42 Nm
torque
22/38
Advertisement
