Advertisement
5/28/22, 10:13 AM
POSTPROCESSES
18 – Replace the spacer
19 – In case of reusing the rear window
20 – Install the rear window
https://www.newtis.info/tisv2/a/en/g20-m340i-xdrive-lim/repair-manuals/51-body-equipment/51-44-headlining/1VncysQyIM
Removing and installing/replacing the headlining (equipment specification without slide/tilt sunroof)
Clip in clips (2) on the headlining (1).
Completely remove the available spacer buffers (1).
Remove the adhesive residue on the body and clean
the adhesive area.
Stick the new spacer buffers (1) in the centre on the
engraved markings on the body side.
Parts: Spacer buffer
Remove the adhesive bead (1) on the rear window
(2) with the special tool 0 410 807.
15/38
Advertisement
