Advertisement
5/28/22, 10:13 AM
MAIN WORK
16 – Remove headlining
Prerequisite
The front seats have been fully adjusted towards the bottom.
The front seat backrests have been fully adjusted towards the rear.
https://www.newtis.info/tisv2/a/en/g20-m340i-xdrive-lim/repair-manuals/51-body-equipment/51-44-headlining/1VncysQyIM
Removing and installing/replacing the headlining (equipment specification without slide/tilt sunroof)
Unlock plug connection (1) and disconnect.
Secure cable (2) to rear window with adhesive tape.
Tape off body in area of piercing point with fabric
adhesive tape.
Push the thread (1) through the adhesive bead along
the line from the inside.
Cut out the rear window with spider 2 357 248.
Remove the rear window with the help of the special
tool 2 184 377.
Remove adhesive bead from the body using special
tool 0 410 807 and clean the adhesive area.
Unclip the headlining (1) from the clips (2) downward.
13/38
Advertisement
