Cub Cadet 7530 Operator's Manual page 61

Your tractor is equipped with a drawbar. Use the drawbar for connecting
all pull-behind implements.
DRAWBAR HITCH
CONNECTING PIN HOLE
IMPLEMENT CONNECTING
PIN HOLE
The drawbar must be in the storage position when using the three-point hitch.
STORAGE POSITION STORAGE POSITION STORAGE POSITION
(WITH MID PTO) (WITH MID PTO) (WITH MID PTO)
WITH MID PTO
Try to balance the load primarily on the implement wheels –as in
loading a trailer or spreader. Avoid overloading the drawbar. Add
front end weights for improved stability. Engage the clutch smoothly,
avoid jerking and use the brakes cautiously to avoid jackknifing.
Rear upset can result if pulling from wrong location on tractor.
Hitch only to the drawbar. Use 3 point hitch only with the implements
designed for its use – not as a drawbar.
DRAWBAR
STORAGE PIN HOLE
WITHOUT MID PTO
53
OPERATING INSTRUCTION
DRAWBAR
OPERATING
POSITION
STORAGE POSITION
(WITHOUT MID PTO)
WITHOUT MID PTO