Cub Cadet 7530 Operator's Manual page 35

(GEAR Drive)
7
5. PARK BRAKE LEVER
5
(Hydrostatic Drive)
ON
1. The park brake must be on to prevent
movement of the tractor during stationary
power takeoff work or when the tractor
is parked. To engage the park brake,
lock the brake pedals together, push
down on the brake pedals and move
the park brake lever downward. Push
the brake pedal down to release the
park brake.
2. Before getting off the tractor,
disengage the PTO, lower all implements
to the ground, place all control levers
PARK BRAKE PARK BRAKE
in their neutral positions,set the parking
brake, stop the engine and remove
the key.
3. If it is necessary to park on an incline,
be sure to check the wheels to prevent
accidental rolling of the machine.
(HYDROSTATIC DRIVE)
It is free on engine brake with the
range lever engaged, be sure set
the parking brake.
27
INSTRUMENTS/CONTROLS
BRAKE PEDAL
5