Safety/Decals - Cub Cadet 7530 Operator's Manual

STEP 1
ROPS BAR ROPS BAR ROPS BAR
( ( ( (
NORMAL NORMAL NORMAL
OPERATING OPERATING OPERATING
POSITION POSITION
POSITION POSITION
PIN PIN
SLIT
While holding the ROPS bar.
CAREFULLY pull the position pins.
STEP 2
POSITION PIN
And then Rotate position pin to (90 ).
STEP 3
CAREFULLY move the ROPS bar
to the desired position.
Rotate position pin and insert GUIDE
to SLIT. In this state, move ROPS bar
up and down and position pin is
installed completely ROPS bar can
set at three position.
STEP 4
STEP 5
ROPS BAR ROPS BAR ROPS BAR
( (
UPRIGHT UPRIGHT UPRIGHT
POSITION POSITION
Adjustment of Foldable ROPS.
If you feel less friction when the ROPS
is in the upright position, tighten the
nut
in the movement.
ROPS BAR
13

SAFETY/DECALS

SLIT
( ( ( (
POSITION PIN
untill you feel the right friction
Rollover protection is provided
only with proper assembly. Lock
pins, must be in place. Correct
parts may be obtained from your
dealer.
HOLE