Table of Contents
Advertisement
Self-test mode of wired remote controller
Use of self-test mode [See the image
1
If you want to use the various additional functions for your Wired Remote Controller, press the
buttons at the same time for more than 3 seconds.
•
The password entry screen appears.
2
Enter the password, "0202," and then press the
•
The settings screen for installation/service mode appears.
3
Select Self-Test Mode in Service Mode.
4
Self-Test Mode consists of Self-Test Mode Display that shows operation value satus and menus that can turn each
component on or off.
DB68-12533A-00_IM_EHS Wired Remote_CV_Book_EN_.indd 23
]
D
button.
and
English
23
2023-08-07 오후 2:12:33
Advertisement
Table of Contents
