Table of Contents
Advertisement
Connecting 2 or more wired remote controller
Outdoor unit
COM1 (F1, F2)
Unit No. 1
Wired Remote
Controller
ex)
Unit No.
1
2
3
CAUTION
•
If the DVM Hydro unit/Hydro unit HT needs to share the temperature value of the hot water tank, it must be
connected to the same remote controller that is connected to other DVM Hydro unit/Hydro unit HT that is
connected directly to the hot water tank with a temperature sensor. Also, when there are more than 2 wired
remote controllers, they should be connected to same communication line.
•
When multiple units (DVM Hydro unit/Hydro unit HT) are connected to one wired remote controller, type of the
units must be same.
‐ Different types of units (DVM Hydro unit/Hydro unit HT) should not be connected to the same wire remote
controller
DB68-12533A-00_IM_EHS Wired Remote_CV_Book_EN_.indd 13
Hot water tank
sensor
COM1 (F1, F2)
DVM Hydro unit/
Hydro unit HT
Unit No. 2
COM2 (F3, F4)
Wired Remote
Controller
Water tank sensor cable wiring
Connected
Connected
Not connected
Hot water tank
COM1 (F1, F2)
DVM Hydro unit/
Hydro unit HT
Unit No. 3
COM2 (F3, F4)
05 Series install option SEG24 setting
DVM Hydro unit/
Hydro unit HT
0
0
1
English
13
2023-08-07 오후 2:12:30
Advertisement
Table of Contents
