Table of Contents
Advertisement
Installation/Service mode
Installation/Service mode
When the microSD Card is removed during download
1
When you remove the microSD Card during download, the "INSERT
MICROSD CARD AND SYSTEM RESET" screen appears and the download
is stopped.
2
When you insert the microSD Card and press the
system reset, download starts again after finishing the reset.
NOTE
•
When you reset the Wired Remote Controller while the microSD Card is
removed, the above message appears on the screen in standby mode.
•
When you reset the Wired Remote Controller while the microSD Card is
removed and then inserted, the following actions are performed.
‐ If the reinserted microSD Card contains all the files for update, update
proceeds regardless of the version of the file.
‐ If the reinserted microSD Card contains any missing files for update,
the above message appears in standby mode.
22 English
DB68-12533A-00_IM_EHS Wired Remote_CV_Book_EN_.indd 22
and
buttons for
2023-08-07 오후 2:12:33
Advertisement
Table of Contents
