Table of Contents
Advertisement
EXCELL PRECISION CO., LTD.
2-3-1 Weighing Mode
Ⅰ. Units Selection
Press the
key to select the desired weighing unit.
UNITS
There are 13 units available: g, ct, lb, oz, dr, GN, ozt, dwt, MM, tl.J, tl.T, tl.H and t.
Ⅱ Precision Shifting Function
.
Press the
key to shift from general resolution to high resolution.
HR
Ⅲ Display Unit Weight Function
.
Press the
key to shift between Display Unit Weight Mode and Display pcs Mode.
HR
Ⅳ. Tare Function
1. Place the container on the platter. After stable, press the
weight. The display returns to zero and the tare indicator
2. Place the object into the container, and the net weight of the object is displayed.
3. Remove the container and the object from the platter, and the negative value of the container
weight is displayed. Press the
The balance can be tarred continuously up to its full capacity.
If the tare indicator
Please press the
BH3 Series
( only available for approval models)
(only available for non-approval models)
T
key again to re-zero and the tare indicator is off.
T
is still on, after pressing the
→0←
key to zero the balance, and the tare indicator
ON
T
key to deduct the container
T
is on.
T
key to exit the tare mode.
13
T
will go off.
Advertisement
Table of Contents
