Table of Contents
Advertisement
EXCELL PRECISION CO., LTD
1-6 Self-Test Mode
Set the switch SWA1 on the bottom of machine to the LOCK position.
When power is off, hold NET/GROSS , and press ON/ZERO key,
Wait till display shows
Press
ON/ZERO
INTERNAL VALUE MODE
Press TARE to enter, and the display shows internal value
Please check whether the internal value has changed obviously with weight changing.
Please check the backlight.
Press ON/ZERO key to back to the last screen , the display shows
KEYPAD TEST MODE
Press TARE/ PT to enter, display shows
Keypad's internal code: TARE key= 07 、 UNITS key= 06 、 NET/GROSS key=05
Press ON/ZERO key to back to the last screen , the display shows
FIRMWARE VERSION DISPLAY MODE
Press TARE/ PT to enter , display shows the firmware version
Press TARE/ PT key again, the display shows maintenance number
Press ON/ZERO key to back to the last screen, display shows
BACK TO THE LAST SCREEN
Press TARE/ PT key to exit self-test mode, the scale will restart automatically.
02005302
Press
key
ON/ZERO
Press
key
ON/ZERO
Press
key
ON/ZERO
key
to enter "Self-Test Mode"
Press
Press
UNITS
Press
UNITS
Press
UNITS
( must hook up Load Cell to test)
10
.
key
UNITS
key
key
key
,
for 2 secs
ZSME300000237
Advertisement
Table of Contents
