Table of Contents
Advertisement
EXCELL PRECISION CO., LTD.
3-2-1 External Weight Calibration
Press the
key
Ensure the platter is on the
balance and make sure there
is no weight on the platter.
Press the
key.
After stable
Load the indicated calibration
weight onto the platter
according to the
display. Press
the
key
Press the
key again.
The input calibration weight must be the value ranged from 90% to 110% of
interval value of the original calibration weight.
BH3 Series
.
.
.
.
is not accessible for approval models.
The display shows the calibration weight
(equal to the full capacity) and the weight
kg
unit. The first digit flashes.
The calibration weight can be
modified if necessary.
The display flashes the calibration
kg
weight to be loaded.
When the scale reaches stability, the
display shows calibration weight.
kg
Unload all the weights from the platter, and
the calibration procedure is completed.
kg
⇒ Upward digit selecting (0-9)
P
CS
5
⇒ Downward digit selecting (9-0)
HR
6
→0←
⇒ Move the cursor rightward
ON
4
⇒ Move the cursor leftward
T
3
28
Advertisement
Table of Contents
