Counting Mode - Excell BH3 Service Manual

Precision balance

Hide thumbs Also See for BH3:

Table of Contents

EXCELL PRECISION CO., LTD.

2-3-2 Counting Mode

Ⅰ. Sampling

1. Press the

MODE

key to select the Counting mode and the display shows

2. Press the

key to select a sample size from 10, 20, 50, 100, or 200 pcs.

3. Place as many items as the selected sample size, and press the

"disappears, the sampling process is completed and the balance is ready to

count.

4. Press the

key to shift between "Unit Weight Mode Display" and "PCS Mode Display".

The unit weight of sample is not sufficient: The weight of a sample should be heavier than

the 0.2d (d=division). When the unit weight of the sample is too small (less than 0.2

divisions), "

The last sample size is memorized when the balance is switched off. When the balance is

switched on again, press the

BH3 Series

pcs" is displayed.

key to enter the counting mode.

pcs.

key. After the sign

Table of Contents