EXCELL PRECISION CO., LTD.
Chapter 2 General Operation Description
2-1 Backlight Function
Press
key to loop select the display backlight mode: Auto 1~4, bL. on, bL. oFF.
Auto 1~4 "Auto Backlight" mode. When the weight is over 10d or any key is pressed, the
backlight will be switched on. When the weight returns to zero (the weight on
platform is less than 10d), the display backlight will switch off after 10 seconds.
1~4 (25%~100% backlight) is the brightness selection. Default is 3 (75%).
bL. On Display backlight is on all the time.
bL. oFF Display backlight is off.
2-2 Weighing Mode
2-2-1 Units Selection
1.
After indicator is turned on, use UNITS key to select a unit from kg, lb, tael or viss, as
the screen indicated.
2.
The selected unit will be memorized when you turn the indicator off. And the
memorized unit will appear after you turn on the indicator next time.
2-2-2 Zero Function
Press
key to re-zero the display with no load on the platter. When zero is set, the
(
) symbol will be displayed.
2-2-3 Tare Function
1. When the weight of the container is unknown (
Place the container on the platter, after stable and press
returns to zero and net indication (
Place goods into the container, then the indicator shows the net weight of goods.
Clear tare value
When removing the container and goods, the display shows the negative weight value
of the container. Then press
zero and net indication (
Recall tare value
Press
Multiple tare operation Users can continuously increase or decrease the tare value by
pressing the
The total tare value (tare value + pre-set tare value) can equal the full capacity of the
indicator.
2. When the weight of the container is known (
Press
Use
procedures, the net indication
Place goods into the container, then the indicator shows the net weight of goods.
Clear pretare value
Press
When indicator returns to zero, net indication (
02036XXX
(not available in 4 key model)
) is on.
key the display shows tare value
then
key.
key and the display shows
and
keys to input weight value of the container. After finishing the
(
then
key, and then press
)
) is on.
key to clear tare value. The indicator returns to
)
.
and pretare indication " " is on.
)
key to clear pretare value.
) and pretare indication " " are off.
7
key, the weight value
.
ZSME300000422