Table of Contents
Advertisement
EXCELL PRECISION CO., LTD.
hoLd 0 = Hold function disabled
hoLd 1 = "Peak hold" mode Keep displaying the maximum weight when the weight is
continually changing. To exit this mode, press any key
hoLd 2 = "Stable hold 1" mode When the weight is stable, the LCD shows the current weight
value. To exit this mode, press any key
hoLd 3 = "Stable hold 2" mode When the weight is stable, the LCD shows the current weight
value. When the weight returns to zero (<10d), the hold mode is cancelled
automatically.
2-1-7 FnC 07 Auto Unit Weight Averaging Setting
Press
key
TARE
Press
TARE
key
2-1-8 FnC 08 Two Weighing Units Setting
Press
key
TARE
Press
key
TARE
2-1-9 FnC 09 Unstable Tare
Press
key
TARE
Press
TARE
key
020261XX/020264XX/020268XX
020311XX/020314XX/020318XX
Auto unit weight averaging setting
LCD displays the last saved parameter setting
Use ON/ZERO or UNITS keys to key in the parameters
Default setting = 0
0 Auto unit weight averaging
1 Disable auto unit weight averaging
If CFN02=4, CFN05=OFF, FNC 07 setting is unavailable.
FnC 07 Setting is unavailable for Brazil models.
Two weighing units setting
LCD displays the last saved parameter setting
Use ON|ZERO or UNITS key to key in the parameters for two
weighing units
Default setting = 0
0 two weighing units function is not activated
To activate two weighing units, please set the 2nd weighing unit to be:
1 2nd weighing unit in CSP 01
2 3rd weighing unit in CSP 01
3 4th weighing unit in CSP 01
If it set to 1~3, it only displays the 1st weighing unit and the
2nd weighing unit
Unstable Tare setting
LCD displays the last saved parameter setting
Use
or
ON|ZERO
UNITS
second weighing unit
Default setting = 0
0 Disable tare operation while unstable
1 Enable tare operation while unstable
Only available for non-approval models. (CFN 02=0)
key to key in the parameters for
ZSMT300000351
selected
Advertisement
Table of Contents
