Hardware Description
4.5 I2C Interface
The AM273x SoC supports three I2C interfaces: MSS_I2CA, RCSS_I2CA, and RCSS_I2CB. The MSS_I2CA
lines are muxed out of the controller by default, while the RCSS_I2CA and RCSS_I2CB lines require pin muxing
to be accessible. Information regarding the locations of the I2C modules for the AM273x can be found in the Pin
Attributes section of the AM273x data sheet.
•
MSS_I2CA Interface:
– Default pins:
•
MSS_I2CA_SDA: F16
•
MSS_I2CA_SCL: F18
– Identify the EVM through the Board ID memory device (CAV24C02WE-GT3)
– Read 1.2V, 1.8V, and 3.3V digital supply current sensors
– Read 1.2V SRAM supply current sensor
– Read temp sensor
– Interface with 60 pin debug connector
•
RCSS_I2CA:
– Not available on the AM273x EVM by default
•
RCSS_I2CB:
– Not available on the AM273x EVM by default
22
AM273x Evaluation Module
Figure 4-11. MSS_I2CA Block Diagram
Copyright © 2024 Texas Instruments Incorporated
SPRUIY1B – NOVEMBER 2020 – REVISED FEBRUARY 2024
Submit Document Feedback
www.ti.com