Kit Overview
2.4 Daughter Cards
The AM273x EVM development kit provides an easy and inexpensive way to develop applications with the
AM273x Series microcontroller. Daughter cards are add-on boards that follow a pin-out standard created by
Texas Instruments. The TI and third-party ecosystem of daughter cards greatly expands the peripherals and
potential applications that you can easily explore with the AM273x EVM.
2.4.1 Connecting the AM273x EVM to the AWR2243BOOST EVM
The AM273x EVM can be connected to the AWR2243BOOST EVM for developing a complete radar system with
front end and processor.
2.4.2 Connecting the AM273x EVM to the DCA1000
The AM273x EVM can be connected to the DCA1000 FGPA platform to allow for LVDS data streaming.
AM273x EVM and DCA1000 EVM can be connected with the help of a Samtec ribbon cable connected between
Debug Connector J7 (see
Figure
2-3.
Figure 2-3. Interfacing DCA1000 EVM to Debug Connector of the AM273x EVM
6
AM273x Evaluation Module
Table
5-4) on the AM273x EVM and DCA1000EVM 60-pin connector, as shown in
Copyright © 2024 Texas Instruments Incorporated
SPRUIY1B – NOVEMBER 2020 – REVISED FEBRUARY 2024
Submit Document Feedback
www.ti.com