Kit Overview
2.2 Key Features
•
Dual 60-pin high density (HD) connector interface with TI's front end radar device EVMs, such as the
AWR2243BOOST
•
XDS110-based JTAG emulation with Serial port for onboard QSPI flash programming
•
UART to USB Debug port for terminal access using FT4232H
•
External JTAG/ Emulator Interface with TRACE support over 60-pin MIPI connector
•
Debug, SPI, I2C, and LVDS connected to 60-pin Debug connector
•
Ethernet interface to stream the captured data over the network to the host PC
•
Dual On-board CAN-FD transceiver
•
One button and LED for basic user interface
•
12V power jack to power the board
2.3 Component Identification
4
AM273x Evaluation Module
Figure 2-1. AM273x EVM Top Component Identification
Copyright © 2024 Texas Instruments Incorporated
SPRUIY1B – NOVEMBER 2020 – REVISED FEBRUARY 2024
Submit Document Feedback
www.ti.com