Memory Offset Tuning - Yaesu VX-7R Operating Manual

R
EGULAR

Memory Offset Tuning

Once you have recalled a particular memory channel, you may easily tune off that channel,
as though you were in the "VFO" mode.
1. With the VX-7R in the "MR" (Memory Recall) mode, select the desired memory chan-
nel.
2. Now press and hold in the
placed by one which says "MT" ("Memory Tuning").
3. Rotate the DIAL, as desired, to tune to a new frequency.
The synthesizer steps selected for VFO operation on the
current band will be the steps used during Memory Tun-
ing.
4. If you wish to return to the original memory frequency, press and hold in the
for 1/2 second. The "MT" indicator will be replaced by "MR."
5. If you wish to store a new frequency set during Memory Tuning, just press and hold in
the key for 1/2 second, per normal memory storage procedure. The microproces-
sor will automatically set itself to the next-available clear memory location, and you
then press
If you want to replace the original memory contents with those of the new
frequency, be sure to rotate the DIAL to the original memory channel num-
ber!
Any required CTCSS/DCS changes, or repeater offset modifications, must be done before
storing the data into the new (or original) memory channel location.
VX-7R O
PERATING
M
EMORY
key for 1/2 second. The "MR" indicator will be re-
again to lock in the new frequency. .
M
ANUAL
M
C O
HANNEL PERATION
M
EMORY ODE
key
49