Selecting The Unit Of Altimeter; Correcting The Altimeter Setting (Altimeter Offset) - Yaesu VX-7R Operating Manual

Selecting the Units of Altitude
1. Press the key, then press the
2. Rotate the DIAL to select the Menu Item labeled (Mea-
surements #6: ALTITUDE UNIT).
3. Press the or
ft).
4. Press the PTT key momentarily to save the new setting and exit to normal operation.

Correcting the Altimeter Setting (Altimeter Offset)

1. Press the key, then press the
2. Rotate the DIAL to select the Menu Item labeled (Measurements #7: ALTITUDE
OFFSET).
3. Press the key to enable setting of this Menu Item.
4. Press the
units.
5. Press the or
current location in "m" units.
6. Press the key to save the new setting.
7. Press the PTT key momentarily to exit to normal operation.
VX-7R O
PERATING
S
ENSOR
key to select the preferred unit (m or
key to indicate the altimeter data in "m"
key to adjust the VX-7R display to the true altitude at your
M
ANUAL
M O
ODE PTIONS
key to enter the Set Mode.
key to enter the Set Mode.
S M
ENSOR ODE
71