Yaesu VX-7R Operating Manual page 89

Display Setup #7 [ LED COLOR 2 ]
Function: Selects the "STROBE" color for each operating status.
Main BUSY: Sets the STROBE color displayed while the squelch is open on the "Main"
band (Default: 1).
Sub BUSY: Sets the STROBE color displayed while the squelch is open on the "Sub"
band (Default: 2).
DUAL BUSY: Sets the STROBE color displayed during Dual Receive operation (De-
fault: 3).
Main TX: Sets the STROBE color displayed while transmitting on the "Main" band
(Default: 4).
Sub TX: Sets the STROBE color displayed while transmitting on the "Sub" band
(Default: 5).
CHG Complete: Set the STROBE color displayed when battery charging is finished (De-
fault: 2).
In this mode, press the
and press the
Display Setup #8 [ METER SYMBOL ]
Function: Selects the S- & TX PO meter Symbol.
Available Values: Six patterns
S1:
S2:
S3:
S4:
S5:
CHR:
Default: S1:
The default "
several other symbols. See page 76 for details.
TSQ/DCS/DTMF #1 [ SQL TYPE ]
Function: Selects the Tone Encoder and/or Decoder mode.
Available Values: OFF/TONE/TONE SQL/DCS
Default: OFF
TONE: CTCSS Encoder
TONE SQL:CTCSS Encoder/Decoder
DCS: Digital Coded Squelch Encoder/Decoder
VX-7R O
PERATING
key to enable the setting of the "STROBE" color, ,
key again to exit from this item. See page 79 for details.
" symbol which is used for last meter type may be replaced by
M
ANUAL
S M
ET ODE
87