Keypad/Lcd Illumination; Disabling The Keypad Beeper - Yaesu VX-7R Operating Manual

O
PERATION
Your VX-7R includes a reddish illumination lamp which aids in nighttime operation. The
red illumination yields clear viewing of the display in a dark environment, with minimal
degradation of your night vision. Three options for activating the lamp are provided:
KEY Mode:
CONTINUE Mode: Illuminates the Keypad/LCD continuously.
OFF Mode:
Here is the procedure for setting up the Lamp mode:
1. Press the key, then press the
2. Rotate the DIAL to select the Menu Item labeled (Display
Setup #5: LAMP MODE).
3. Press the or
described above.
4. When you have made your choice, press the PTT key to save the new setting and
return to normal operation.
If the keypad's Beeper creates an inconvenience (particularly when operating in a quiet
room), it may easily be disabled.
1. Press key, then press the
2. Rotate the DIAL to select the Menu Item labeled (Basic Setup #9: KEY BEEP).
3. Press the or
to OFF.
4. When you have made your selection, press the PTT key
to save the new setting and exit to normal operation.
5. If you wish to re-enable the Beeper, just repeat the above procedure, pressing the
key to select ON in step "3" above.
or
24
K /LCD I
EYPAD
Illuminates the Keypad/LCD for 5 seconds when any key pressed.
Disables the Keypad/LCD lamp.
key to select one of the three modes
D
ISABLING THE
key to enter the Set mode.
key to change the setting from ON
LLUMINATION
key to enter the Set mode.
K B
EYPAD EEPER
VX-7R O M
PERATING ANUAL