Removing The Expansion Card Risers - Dell 34PR7 Installation And Service Manual

Table of Contents

Figure 46. Butterfly riser

1. Slot 2 (Low profile) (x16 connector)

2. Slot 1 (Low profile) (x8 connector)

NOTE:

The expansion-card slots are not hot-swappable.

To ensure proper cooling and mechanical fit, the following table provides guidelines for installing expansion cards. The expansion

cards with the highest priority should be installed first using the slot priority indicated. All the other expansion cards should be

installed in the card priority and slot priority order.

Table 22. Configuration 0: butterfly riser

Card type

Dell BOSS S2 Module

Intel (NIC: 10 Gb)

Broadcom (NIC: 10 Gb)

Intel (NIC: 1 Gb)

Broadcom (NIC: 1 Gb)

Dell External Adapter

aPERC 11

FPERC 11

FPERC 10.15

aPERC 10.15

FPERC HBA11

aPERC HBA11

Removing the expansion card risers

Prerequisites

1. Follow the safety guidelines listed in the

Installing and removing system components

Slot priority

BOSS

1, 2

Integrated slot

Safety

instructions.

Maximum number of cards

Table of Contents

E77s Emc poweredge r350