Msds For Cleantex® Alcopad - Tektronix Phaser 850 User Manual

MSDS for CleanTex
SECTION 1 – PRODUCT IDENTIFICATION
Trade name:
Alcopad
Product identification numbers: 806B, 806C, 806H, 806T, 806Z, 806
Chemical name and synonyms: Isopropyl Alcohol
Chemical formula: CH CH(OH)CH
2
Emergency telephone numbers: CHEMTREC (Transportation): 1-800-424-9300
Product Use: Tektronix Phaser
SECTION 2 – INFORMATION ON INGREDIENTS
Component CAS# % OSHA PEL (ppm) ACGIL TLV (ppm)
Isopropyl alcohol 67-63-0 91.0 400 400
Deionized water 7732-18-5 9.0 NA NA
SECTION 3 – HAZARDS IDENTIFICATION
Product is distributed as a single-use, presaturated pad, in which all the liquid is absorbed by the
applicator. Isopropyl alcohol is a flammable liquid. Eye contact will cause local irritation and
burning sensations with possible injury if not removed promptly. Repeated or prolonged contact
with skin may produce irritation and cause dermatitis. Exposure above TLV may cause irritation of
respiratory tract and eyes along with headaches, dizziness and CNS effects. May be harmful if
swallowed.
Carcinogenicity (OSHA/NTP/IARC/ACGIH): Not Listed.
Medical Conditions Aggravated by Exposure: Not Listed.
SECTION 4 – FIRST AID MEASURES
EYE CONTACT: Flush with water for 15 minutes, including under eyelids. Get Medical help.
SKIN CONTACT: Flush with water.
INHALATION: Remove to fresh air. Keep at rest. Restore and/or support breathing as needed. Get
prompt Medical attention.
INGESTION: In the unlikely event of ingestion of a wiper, first aid measures should focus on
removal of the object and preventing choking. Once removed, keep affected person at rest. Call
physician immediately.
SECTION 5 – FIRE-FIGHTING MEASURES
FLASH POINT (TCC): 56 degrees F
FLAMMABLE LIMITS (% BY VOLUME): LEL: NA
AUTOIGNITION TEMPERATURE degrees F (degrees C): NA
EXTINGUISHING MEDIA: Isopropyl-alcohol fires may be extinguished using carbon dioxide, dry
chemical or alcohol foam. Water may be used to cool containers exposed to the fire.
UNUSUAL FIRE OR EXPLOSION HAZARDS: Isopropyl alcohol may release vapors which may
ignite at or above flash point.
NFPA RATING: HEALTH (1)
FLAMMABILITY (3)
REACTIVITY (0)
Formulation is classified as an OSHA Class IB Flammable Liquid
NA = Not Available
SECTION 6 – ACCIDENTAL RELEASE MEASURES
Since the isopropyl-alcohol solution is completely absorbed by the applicator and the amount of
isopropyl alcohol per applicator is small, the chance of a significant spill occurring is small. In the
event however, that a significant amount of liquid is released, ventilate the area, especially low areas
where vapors may collect, and remove all sources of ignition. Cleanup personnel need protection
against liquid contact and vapor inhalation.
SECTION 7 – HANDLING AND STORAGE
Store in a clean, cool, ventilated area away from sources of ignition and oxidizing agents. Handle
and store in a manner suitable for an OSHA class IB Flammable Liquid. Electrical services must
meet applicable codes. Use non-sparking tools.
SECTION 8 – EXPOSURE CONTROL – PERSONAL PROTECTION
Provide ventilation to maintain TLV. Use non-sparking tools. Avoid inhalation of vapors, contact
with eyes and repeated or prolonged contact with skin. Do not take internally.
Advanced Features and Troubleshooting Manual
Phaser 850 Printer Material Safety Data Sheets
®
Alcopad
Tektronix Part Number:
016-1845-00
3
®
850 Color Printer
UEL: NA
149