Tektronix Phaser 850 User Manual page 131

c.
Scrub each roller thoroughly. If the wipe becomes dirty, discard it and use
another.
5.
The lower paper-feed rollers are located below the maintenance drawer (A): one set
of rollers is black rubber; the other set is white plastic. To clean the lower rollers:
a.
Use a prepackaged alcohol-soaked wipe, or use a lint-free cloth with 90-percent
isopropyl alcohol. Place and hold the cleaning wipe on top of the white and
black rollers.
b.
Use the blue thumbwheel to turn the rollers. Rotate the rollers four or five
complete revolutions for each roller segment to ensure proper cleaning.
c.
Scrub each roller thoroughly until clean. If the wipe becomes dirty, discard it
and use another.
Advanced Features and Troubleshooting Manual
Cleaning Phaser 850 Printers
9103-11
0643-164
131