Quick Collate; Requirements - Tektronix Phaser 850 User Manual

Quick Collate

Quick Collate

Requirements

I DP or DX Feature Set
I Hard drive (internal)
Quick Collate speeds the collation and printing of large print jobs and multiple sets of
documents. The collate function in some software applications repeatedly sends each
page in sequence to the printer until the requested number of copies is printed. With the
Quick Collate option, the job is sent only once and then multiple collated sets are
produced by the printer, allowing much faster processing time.
The number of pages that can be collated at one time depends on the size of the hard disk
installed in the printer.
Note
Make sure that you turn off the collate function in your application, because the
printer's Quick Collate option is faster than the collate function in software
applications.
In a supported driver, locate the Quick Collate option:
LaserWriter 8.3.4 driver:
I
In the Print dialog box, click Options.
LaserWriter 8.5.1 driver:
I
In the Print dialog box, from the pull-down menu (General) select Printer
Specific Options.
Windows 95 / Windows 98 PostScript driver:
I
Start/Settings/Printers, then select Properties for your printer. In the Setup tab,
select Advanced Paper Options.
Windows 2000 driver:
I
From the Layout tab or Paper/Quality tab, click Advanced.
Windows NT driver:
I
From the Properties tab, select the Advanced tab. From the Document Options
tab, select Printer Features.
Adobe PS3 driver for Windows 3.1:
I
Select the Features tab options.
Quick Collate and 1st Page Preview
When you use the printer's Quick Collate option with 1st Page Preview, only the first page
of the first set is printed before pausing for your review.
76 Phaser 850 Color Printer