Tektronix Phaser 850 User Manual page 146

Phaser 850 Printer Material Safety Data Sheets
SECTION 10 - STABILITY AND REACTIVITY
STABILITY: Stable.
INCOMPATIBILITY WITH OTHER MATERIALS: Strong oxidizing agents
HAZARDOUS DECOMPOSITION PRODUCTS: At elevated temperatures, formaldehyde may be
generated.
HAZARDOUS POLYMERIZATION: Will not occur.
SECTION 11 - TOXICOLOGICAL INFORMATION
No toxicology data on mixture.
SECTION 12 - ECOLOGICAL INFORMATION
Not available.
SECTION 13 - DISPOSAL CONSIDERATIONS
Fluid is not listed as RCRA hazardous waste. Dispose of in accordance with federal, state, and local
regulations.
SECTION 14 - TRANSPORT INFORMATION
DOT: Not regulated.
SECTION 15 - REGULATORY INFORMATION
The following information pertains to the ingredients of Tektronix Silicone Intermediate Transfer
Layer Fluid:
TSCA (Toxic Substances Control Act): Listed in the TSCA inventory as verified by our suppliers.
California Proposition 65: Not regulated.
SARA (Superfund Amendment and Reauthorization Acts): Not listed in SARA Section 313. Not
listed as SARA Extremely Hazardous Substance.
RCRA (Resource Conservation and Recovery Act): Not listed as RCRA hazardous wastes.
The ingredients of this fluid are not listed as carcinogenic by OSHA, IARC or NTP.
SECTION 16 - OTHER INFORMATION
Original preparation date: September 17, 1999.
Prepared by CPID Environmental, Health, and Safety/JMP
Tektronix, Incorporated
P.O. Box 500
Chemical Documentation
Mail Stop 46-825
Beaverton, Oregon 97077
Printer information: 1-800-835-6100
MSDS information: (503) 685-2758
146 Phaser 850 Color Printer