Turning the Startup Page on or off
By default, the printer produces a Startup Page each time the printer is turned on or reset.
If desired, you can disable the Startup Page. There are three methods for turning on/
turning off the Startup Page:
From the printer's front panel
1.
Scroll to Menu; press Select.
2.
Scroll to Printer Configuration; press Select.
3.
Scroll to Default Printer Settings; press Select.
4.
Scroll to Startup Page; press Select to toggle the setting.
5.
Scroll to Exit; press Select.
From PhaserLink Printer Management software
Refer to the PhaserShare Networking Manual for information on using your World Wide
Web browser to access the printer via a TCP/IP network connection.
From utility files
Download one of the following files from the printer's CD-ROM:
I
Macintosh: Use the Apple Printer Utility (refer to page 95 for instructions).
I
PC: Use utility files STARTPG.PS (to turn on the Startup Page), NOSTRTPG.PS (to
turn off the Startup Page); refer to page 91 for downloading instructions.
Advanced Features and Troubleshooting Manual
Troubleshooting Phaser 850 Printers
119