Loading The High-Capacity Paper Tray Assembly; Supported Media; Loading The Tray - Tektronix Phaser 850 User Manual

Loading the High-Capacity Paper Tray
Assembly

Supported media

See page 9 for supplies ordering information.
Paper only
I 500-sheet capacity
I
Bond or equivalent, 63 - 120 g/m
I You can use up to two High-Capacity Paper Tray Assemblies with
your printer.

Loading the tray

1.
Angle the paper stack to match the angle of the tray.
2. Use the tray's maximum-capacity label to determine how much
paper to load.
3.
Load paper with the side to be printed face-up.
For single-sided printing, load letterhead paper with the top
I
of the page at the front of the tray.
For two-sided printing on letterhead, refer to page 42.
I
4.
Place the paper snugly against the inside left back wall of the tray.
User Guide
2
, 17 - 32 lb.
33