Loading The Tray - Tektronix Phaser 850 User Manual

Loading the tray

1.
Use the tray's maximum-capacity label to determine how much
paper or transparency to load.
2.
Load paper with the side to be printed face-up.
For single-sided printing, load letterhead paper with the top
I
of the page at the front of the tray.
For two-sided printing on letterhead, refer to page 42.
I
3.
Place the paper snugly against the inside left front wall of the tray.
4.
Set the switch on the side of the tray for Paper or Transparency to
match the loaded media. If you are loading labels in the
Paper/Transparency tray, set the tray switch to Paper.
5.
Insert the tray into the printer.
1
Paper
Transparency
2
7 6 5 4 3 2
3
32
5
4
Phaser 850 Color Printer
0643-66.ai