Xerox Phaser 7800DN User Manual page 50

Paper and Media
4. Replace the retainer and snap it into place.
5. Load the custom-size paper in the tray. The tray guides move in increments of 1 mm.
To move the guide locks from the Custom to the Standard paper size position, do the following:
1. Pull out the tray until it stops.
Note: For best results, remove any paper from the tray, pinch the guide levers, and slide the
guides inward.
2. Pry up the retainer with your fingertip, pulling the lower edge toward you.
50 Phaser 7800 Color Printer
User Guide