Xerox Phaser 7800DN User Manual page 147

Paper and Media
Your printer is designed to use various paper and other media types. Follow the guidelines in this section
for the best print quality and to avoid jams:
 ®
Use only Xerox approved paper. For details, see

Use only dry, undamaged paper.
CAUTION: Some paper and other media types can cause poor output quality, increased paper jams,
or damage your printer. Do not use the following:
 Rough or porous paper
 Inkjet paper
 Non-laser glossy or coated paper
 Paper that has been photocopied
 Paper that has been folded or wrinkled
 Paper with cutouts or perforations
 Stapled paper
 Envelopes with windows, metal clasps, side seams, or adhesives with release strips
 Padded envelopes
 Plastic media

Ensure the paper type selected in your print driver matches the paper type on which you are printing.

If you have the same size paper loaded in more than one tray, ensure that the proper tray is selected
in the print driver.

Store your paper and other media properly for optimum print quality. For details, see
Guidelines on page 37.
Print-Quality Modes
Select the correct print-quality setting for your print job from the print driver. For instructions on setting
the print quality, see Selecting Printing Options

Ensure that the print quality is set to the correct mode. For example, if the image does not appear as
vivid and sharp as you expect, set the print quality to Photo. The default setting is Standard.

Use the print-quality settings in the print driver to control print quality. If the print quality is not
suitable, adjust the print-quality setting to an higher level.
®

Use only Xerox approved paper. For details, see
Supported Paper
on page 59. To control the print quality:
Supported Paper
Troubleshooting
on page 36.
Paper Storage
on page 36.
Phaser 7800 Color Printer
User Guide
147