Husqvarna EBE 350S Operator's Manual page 14

8. The second person removes the side seal holders
on both sides of the product (E).
Abrasive material
Speak to your Husqvarna dealer for the selection of
correct abrasive material for your surface operation.
Approved abrasive material on page 31 .
Refer to
Separator
The separator (A) holds the abrasive material and
supplies the blast wheel blades with abrasive material
through the hopper (B).
A
The separator tray (C) keeps contamination away from
the abrasive material and the blast wheel blades.
14
E
B
To fill the product with abrasive
material
WARNING:
protective equipment when you fill the
product with abrasive material. Refer to
Personal protective equipment on page 7 .
1. Make sure that the valve for the abrasive material
To operate the valve for the
is closed. Refer to
abrasive material on page 12 .
2. Open the the separator door.
C
Always use personal
2335 - 001 - 14.12.2023