Y30-Non-Scs, Valid Ff Followed By Data - Xerox 4215 Reference Manual

Y30—Non-SCS, Valid FF Followed by Data
XEROX MRP FAMILY COAX COMMAND REFERENCE
@Y30, n@
Implements an IBM RPQ and takes effect as soon as the
command is received. This function determines the first print
position after the Form Feed (FF) command has been executed.
n
The default is product dependent. PCL platform has a default of
1. If n = 0 is selected, the printer is set to print at position 2 of
the first print line of the next page. If n = 1 is selected, the
printer is set to print at position 1 of the first print line of the
next page.
This option only affects DSC LU3 mode, a NON SCS printing,
and corresponds with the IBM 3268 RPQ SC9503 and the IBM
3287 RPQ N/A.
Example @Y30, 1@ sets the printer to advance to 1st Print Position (PP)
on the next form.
Same print line
Next print line
Next print line
Last print line
FUNCTION SELECTION VIA LINE (FSL) COMMANDS
Values for n are:
0* Next print position is the 2nd Print
Position (PP) on the next form, when a
valid FF, which is not positioned at the
end of the IBM print buffer, is received.
1* Next character position is the 1st Print
Position on the next form, when a valid
FF, which is not positioned at the end of
the IBM print buffer, is received.
Print position
1 2 3
ON OFF
MPP+1
o Form feed
here
Present form
Page boundary
Next form
3-31