Xerox 4215 Reference Manual page 123

XEROX MRP FAMILY COAX COMMAND REFERENCE
Remember When operating in the SCS mode, the Set Horizontal Format
commands override the MPP defaults.
Set Vertical Format command overrides MPL defaults.
•
Set Character Density command overrides CPI defaults.
•
Set Line Density command overrides LPI defaults.
•
SCS command overrides with the last command received at a
•
page boundary being used for page size calculations.
The differences in the available printable area are controlled
•
by the following FSL functions.
— Y10—Set Page Format
— Y13—Set Wrap/Cut Option at Physical Paper Size
— Y88—Define Page Offset
— Y89—Enable Page Offset.
FUNCTION SELECTION VIA LINE (FSL) COMMANDS
3-69