Loading Fonts - Xerox 4215 Reference Manual

Loading fonts

==> TSO EXEC 'XMRP.V1R2M1.CLIST(LDXRXFNT)' '< font name > < printer
destination >'
==> TSO EXEC 'XMRP.V1R2M1.CLIST(LDXRXFNT)' 'FONT0003 RMT221'
XEROX MRP FAMILY COAX COMMAND REFERENCE
Table 7-1. 3816 emulation fonts
Font name Font name
FONT0003 FONT0060
FONT0005 FONT0066
FONT0011 FONT0068
FONT0012 FONT0069
FONT0018 FONT0070
FONT0019 FONT0071
FONT0038 FONT0072
FONT0039 FONT0084
FONT0040 FONT0085
FONT0041 FONT0086
FONT0042 FONT0087
FONT0043 FONT0108
FONT0044 FONT0110
FONT0046 FONT0111
Load one font at a time, by entering the following command:
Replace <font name> with the name of the font to load. The
valid names are listed in Table 7-1. Replace <printer
destination> with the JES remote id set up for the Xerox printer.
The following is an example for loading font FONT0003 to
remote 221:
CAUTION: If you are sending a Restore Factory Default (RSTFCT)
via the Configuration Utility or using the FSL X3 command and
have downloaded fonts to the printer, the mapping tables to the
GFIDs are lost. You must download the fonts again.
CONFIGURATION AND RESOURCE UTILITY (MVS)
Font name
FONT0112
FONT0155
FONT0159
FONT0160
FONT0162
FONT0163
FONT0173
FONT0175
FONT0204
FONT0229
FONT0230
FONT0244
FONT0245
FONT0252
Font name
FONT0253
FONT0254
FONT0281
FONT0290
FONT0751
FONT1051
FONT1053
FONT1056
FONT1351
FONT1653
FONT2103
FONT4555
FONT000A
7-7