Fsl Cross Reference For The Coax Configuration Page - Xerox 4215 Reference Manual

FSL cross reference for the coax configuration page

Func # 1 set to 4
Func # 2 set to 6
Func # 3 set to 10
Func # 5 set to 62
Func # 6 set to 132
Func # 7 set to 1
Func # 8 set to 0
Func # 10 set to 0
Func # 11 set to 2
Func # 12 set to 3
Func # 13 set to 1
Func # 14 set to 1
Func # 19 set to 0
Func # 25 set to 0
Func # 26 set to 1
Func # 27 set to 0
Func # 28 set to 0
Func # 29 set to 0
Func # 30 set to 1
Func # 31 set to 1
XEROX MRP FAMILY COAX COMMAND REFERENCE
The default settings on the coax configuration page are printed
using references to the FSL (Function Select via Line) command
numbers. A list of the items that are printed on the
configuration page is shown in table 1-2. Next to each item is an
abbreviated configuration command name in parentheses.
Table 1-2.
(IBM buffer size)
(Lines per inch)
(Characters per inch)
(Max page length)
(Max print line)
(Set case)
(Set LU1 language)
(Set page format)
(Default paper path)
(Default paper size)
(Set wrap/Cut option)
(Enable graphic option)
(Set simplex/duplex)
(FF before local copy)
(FF after local copy)
(Non-SCS print image)
(Non-SCS CR at MPP+1)
(Non-SCS NL at MPP+1)
(Non-SCS valid FF+data)
(Non-SCS valid FF at end)
FSL Y4, Set Default Line Spacing (Line Spacing - Single, Double),
can be changed, but does not show up on the configuration
report.
FSL Y9, Active GFID, appears on the bottom half of the
configuration page.
For more information on these FSL commands, refer to the
"Function Select via Line commands" chapter. This chapter
includes detailed information on the definition and use of the FSL
commands.
For more information on the use of the Coax Configuration and
Resource Utility, refer to the "Coax Utility" chapter in this
manual.
Command numbers and names
(Non-SCS valid FF)
Func # 32 set to 0
(Non-SCS A.F, at end of job)
Func # 33 set to 0
(Last LF as FF)
Func # 34 set to 1
(Suppress IBM ctrl code)
Func # 36 set to 0
(Printer Emulation)
Func # 37 set to 1
(Communication feature)
Func # 38 set to 1
(Suppress CR & SP)
Func # 44 set to 1
(Set IRQ timer)
Func # 46 set to 12
(ESC mode selection)
Func # 47 set to 1
(Restrict access)
Func # 49 set to 0
(FF after timeout)
Func # 50 set to 0
(Select translate table)
Func # 73 set to 0
(Select APL translate table)
Func # 78 set to 1
(not used)
Func # 79 set to 0
(Enable page offset)
Func # 89 set to 0
(Enable APO)
Func # 98 set to 1
(not used)
Func # 110 set to 1
(not used)
Func # 111 set to 0
(not used)
Func # 112 set to 0
(not used)
Func # 113 set to 1
(Enable Auto paper size
Func # 119 set to 2
(settings at power up)
Func # 120 set to 1
OVERVIEW AND PRINTER SETUP
configuration)
1-9