Dsc Command Descriptions; End Of Message (Em) - Xerox 4215 Reference Manual

DSC command descriptions

Carriage Return (CR)

End of Message (EM)

Form Feed (FF)
New Line (NL)
XEROX MRP FAMILY COAX COMMAND REFERENCE
The descriptions of the DSC commands, shown in hexadecimal,
are listed alphabetically.
05
Moves the print position to the left margin of the current line in
an unformatted print field. In a formatted print field or
unformatted nonprint field, this control code is printed as a
space character. In a formatted nonprint field, it is printed as a
null character.
05 Control sequence of a Carriage Return command
01
In an unformatted print field, this control code terminates the
buffer. In a formatted print field or unformatted nonprint field,
this control code is printed as a space character. In a formatted
nonprint field, it is printed as a null character.
01 Control sequence of an End Of Message
command
02
Moves the print position to the top margin of the next form.
This movement occurs in both print and nonprint fields, and
formatted or unformatted modes.
02 Control sequence of a Form Feed command
03
Moves the print position to the first position of the next line in
an unformatted print field. In a formatted print field or
unformatted nonprint field, this control code is printed as a
space character. In a formatted nonprint field, it is printed as a
null character.
03 Control sequence of a New Line command
DSC AND SCS DATA STREAM COMMANDS
2-3