Y25-Ff Before Local Copy - Xerox 4215 Reference Manual

Y25—FF Before Local Copy
XEROX MRP FAMILY COAX COMMAND REFERENCE
the document you wish to print in duplex. This is especially
important if the document has an uneven number of pages.
Note: The duplex setting cannot be saved in Permanent Storage
N
with the X1 command.
If you share a printer with other users, it is important that you
remember to set function 19 to simplex printing again. If you
forget this, the documents of the other users will also be printed
in duplex, and a page may contain your print job on one side
and the print job of another user on the other side.
Example &&??@ @Y19, 1@ @Y10,1@ prints a document in long-edge
landscape.
&&??@
@Y19, 1@
@Y10,1@
@Y25, n@
Selects a form feed (FF) to be performed before local copy. This
function determines the print position before an Operator
Initiated Local Copy (print screen function).
n
If n = 0 is selected, no automatic form feed is performed
(default). If n = 1 is selected, an automatic form feed is
performed unless a Form Feed command was the last command
received, which means the printer is set to print at position 1 of
the first line of the next page. Refer to the illustration given in
the example.
FUNCTION SELECTION VIA LINE (FSL) COMMANDS
defines "@" as the escape character.
sets long-edge binding, duplex printing.
sets orientation to landscape.
Values for n are:
0* No Form Feed Before Local Copy
1 Form Feed Before Local Copy is
performed.
3-25